4FL.ROUGHER/FINISHER 1/2 S/C SPIRAL COMPR.BIT, T4SRMRF161/2
SKU#:
Minimum Quantity is 1 • Sold in increments of 1
Enter a value between 1 and 99999 in increments of 1.
The geometry of these tools prevents the chipping and furring on the top and bottom surfaces of the material being cut. Ideal for cutting double sided laminates (melamine, vinyl, spray coatings, painted board etc) as well as natural timbers 4 Flute allow for increased high speed machining with high spindle speeds Compression bits all available with advanced coating Chip breaker flute breaks swarf into smaller particles Geometry allows for high feed rates
Material: VHM
Finish: Brt
- The geometry of these tools prevents the chipping and furring on the top and bottom surfaces of the material being cut.
- Ideal for cutting double sided laminates (melamine, vinyl, spray coatings, painted board etc) as well as natural timbers
- 4 Flute allow for increased high speed machining with high spindle speeds
- Compression bits all available with advanced coating
- Chip breaker flute breaks swarf into smaller particles
- Geometry allows for high feed rates
| Wood | Metal | Specialty | Masonry | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
|
|
KEY
OptimalEffective

